C-Panel
Modular. Slimline. Ease of installation. Very long life.
The C-Panel is a modular LED panel designed for use in professional uplighting, backlighting and in downlighting applications. Its high efficiency, high output performance allow it to be used in larger installation such as commercial offices, conference/event halls, entertainment venues, public buildings, etc. The 120 degree wide angle beam ensures that the surface being illuminated is bright and even. Its modular design allows lighting designers to use the C-Panel modules to create the appropriate lighting effect for a single room or the entire building.
|
|
|
Model CP25
The C-Panel CP25 consumes 7.2 watts^ of power per module and is available in warm white, neutral white and cold white. The C-Panel uses high brightness SMD LEDs as its light source and it can be powered from our EDMC9X LED Driver.
Model CP12
The C-Panel CP12 consumes 12 watts of power per module and is available in 2300k warm white. The CP12 module uses high brightness SMD LEDs as its light source and it can be powered from our EDMC3/6 LED Driver.
Installation - CP25
This C-Panel is 150x150mm in size. Multiple modules may be joined using our custom connectors to create linear, rectangular or square flood light sources. Make sure you are grounded to remove any static electricity. Static electricity may damage the LEDs and other C-Panel components.
Installation - CP12
The C-Panel CP12 must be installed on a heatsink capable of dispersing 12 watts of heat. Contact Hotbeam for the correct thermal management criteria.
Features
- Very low height
- High light output of 455 lumens§ per module
- Very long expected life, over 50,000 hrs
- Available from warm white to cool white in the colour temperatures 3000k, 4000k, and 7000k
- 140 degree beam spread
- Powers from our LED Driver - EDMC9X or EDMC3/6
- Modular PCB design
- Quick joining
- Indoor use only
- Two year limited warranty
|
|
|
Warranty
LED Fittings & Modules (C-Panel) are covered by a 2 year manufacturer's warranty against defects on workmanship or materials used. The warranty service is limited to the replacement or repair of the smallest LED segment that become defective under normal usage, as determined by Hotbeam. This warranty does not cover LED Fittings & Modules (C-Panel) that have been abused, improperly used or disassembled. Except as stated above, no other express warranty applies. Any liability for indirect, incidental or consequential damages arising from the failure of the Lamp is excluded.
|
