AquaRibbon Series
Flexible. Slimline. Ease of installation. High light output. Very long life.
The AquaRibbon Series is a family of flexible and high brightness LED strip lights. It has been designed for use outdoors and in interior damp/wet areas. Its small size, waterproof construction and extreme brightness, make it ideal for use in a wide range of applications. The AquaRibbon produces a very bright, smooth light with no discernable hotspots. It can be used in water features; as navigation light in decking, railing and steps; as feature or task lighting in bathrooms and kitchens; and a many other indoor and outdoor situations.
The AquaRibbon consumes less than 12 watts of power per 3 metre length (HBI3-180WR) and is available in warm white, cool white and a range of other colours. The Ribbon uses high brightness SMD LEDs as its light source and it can be powered from our IP66 EDMC Series LED Drivers.
|
|
|
One meter of the HBLL-6WR AquaRibbon produces equivalent light in excess of a 35w halogen lamp.
Installation
The HBI3-180WR AquaRibbon may be cut once along the length of the body to fit into installations if necessary. Cutting marks are printed on the ribbon and must be adhered to. The smallest workable segment of the Ribbon is 50mm long and contains 3 LEDs. The HBI3-180WR may be curved around large radii provided the force does not strain the PCB. The AquaRibbon should be secured down immediately to avoid cyclic fatigue and breakage.
The HBLL-6WR AquaRibbon can simply be mounted onto a surface by first screwing the mounting clips into place and then clipping the extrusion into place. Alternately, the HBLL-6WR extrusion may be mechanically fastened into niches and recesses.
Features
- Very slim form factor, 11mm wide x 4.5mm high x 3M long per reel (HBI-3-180WR) and 19mm wide x 9mm high x 530/1050/1730mm long (HBLL-6WR)
- Very long expected life
- 75% lumens maintenance at 50,000 hours for HBLL-6WR
- Available in warm white (3000k, 3500K), neutral white (3800k) and cool white (5700K or 6300k) and a range of other colours
- 120 degree beam angle
- Powered from our Ribbon driver EDMC3, EDMC6 or EDMC9X
- Flexible PCB ribbon construction (HBI3-180WR) or rigid lengths (HBLL-6WR)
- Very high lumens output (HBLL-6WR) - 480 lumens per meter length (3000k), 520 lumens per meter length (3800k) and 630 lumens per meter length (6700k)
- Low power consumption - less than 12 watt per 3 meter length (HBI3-180WR)
- No ultraviolet (UV) or infrared (IR) in beam
- For indoor and outdoor applications (IP65 for HBI3-180WR, IP67 for HBLL-6WR)
- Two year limited warranty (HBLL-6WR)
|
|
|
Warranty
LED Fittings & Modules (AquaRibbon HBLL-6WR) are covered by a 2 year manufacturer's warranty against defects on workmanship or materials used (Model HBI5-300WR has a 1 year warranty). The warranty service is limited to the replacement or repair of Lamps that become defective under normal usage, as determined by Hotbeam. This warranty does not cover LED Fittings & Modules (AquaRibbon Series) that have been abused, improperly used or disassembled. Except as stated above, no other express warranty applies. Any liability for indirect, incidental or consequential damages arising from the failure of the Lamp is excluded.
|
